Model D15 High Pressure Coolant Pump


The D15 series of Hydra-Cell™ coolant pumps are capable of flow rates up to 10 GPM at pressures up to 2500 PSI.  They are designed to be installed horizontally alongside the machining center. The model D17 is a special configuration enabling installation vertically, akin to centrifugal pumps, submerging the pump head into the coolant tank.

Although capable of 15 GPM with an 1800 RPM motor, the most common configuration is uses a 1200 RPM motor for a flow rate of 10 GPM at pressures from 75 to 2500 PSI.  The reason for this is that most applications do not require more than 10 GPM and therefore you are operating the pump more efficiently and recirculating the coolant less.


D15 high pressure coolant pump system $11,061
catalog pages for D15 coolant pump
D15 Catalog Pages
D15 installation, operations and maintanance manual
D15 Installation/Service Manual
D15 coolant pump parts manual
D15 Parts Manual

(D15 pump D15EABGHFECA, 20HP motor M2000TE12F3P286TCA3, baseplate 104-800, adapter A04-041-1202, coupling A04-048-1204 and pressure regulating valve C62ABBVSSEF)

Maximum free passage: 1/32" ≅20 mesh≅841μ≅0.84mm